HAKKO Tester/Meter Soldering Tester FG-101 (220V W/CAL)

Specifications




Model No:
FG-101


Power consumption
2.6W (100V), 2.9W (110V), 2.6W (120V), 2.7W (220V), 2.8W (230V), 3.0W (240V)


Temperature resolution
1ºC


Temperature measurement range
0 to 700ºC


Temperature precision

±3ºC (300 to 600ºC) ±5ºC (other than above)



Temperature sensor
K (CA)type thermocouple


Voltage resolution
0.1mV


Voltage measurement range
0 to 40mV (AC)


Voltage precision
± (5% of reading + 1 digit)


Resistance resolution
0.1Ω


Resistance measurement range
0 to 40Ω


Resistance precision
± (5% of reading + 1 digit)


Display

LCD : 3 1/2digitsBurnout : -1MAX HOLD : ‘MAX HOLD’ is displayed at the lower right of the LCD



Operating environment
Ambient temperature/humidity range : 0 to 40ºC, 20 to 90%RH (without condensation)


Environmental conditions
Applicable rated pollution degree 2 (According to IEC/UL 61010-1)


Dimensions
200(W)×50(H)×120(D)mm


Weight
1kg




* Weight (excluding battery)* Temperature sensor (No.191-212 or No.191-212C) can only be used to measure temperatures below 500ºC. To measure higher temperatures, use an applicable temperature probe.* When a sensor is not attached or it burns out, the alarm symbol of Burnout(-1) is displayed. The same symbol is also displayed when a temperature outside the measurement range is detected.