หัวแร้งใช้ถ่าน Hakko FX901

Cool design of cordless soldering iron



Quick&easy soldering tip replacement ·The quick-release soldering tip can be easily replaced.



Selective battery ·Various batteries including alkaline and nickel-hydrogen batteries can be used by changing the cartridge.



Easy soldering not only for hobby but for P.C. board processing ·Powerful cord and handy cordless soldering iron. ·Various soldering application is available such as P.W.B., field service and model or radio-controlled models.









1.
INITIAL SET UPPut the soldering tip through the hole in the nipple, then insert them to the unit as shown in Figure 1.Turn the nipple approximately 90 degrees clockwise and screw it tightly on the unit. Be sure to secure the tip tightly. Attach the soldering tip while it is cold.


2.
INSERTING THE BATTERIESSlide down the release button to the UNLOCK position as shown in Figure 2. Remove the battery cartridge from the unit. Check the polarity and insert the batteries in the proper orientation.Place the upper side of the battery cartridge onto the guide of the unit, slide the cartridge, and set the release button to the LOCK position.


3.
HOW TO SOLDERTurn the power switch ON. The LED lamp lights up, and the soldering tip heats up to be soldered after 40 seconds. After soldering, be sure to turn the power switch OFF and attach the protective cap to the unit.














Part No.
Packing List


FX901
Main unit, soldering tip (shape-B), protective cap













Model No.
FX-901




Power supply
AA×4 pcs. (not included)


Power consumption
Alkaline batteries : 6V (6W)Nickel hydrogen batteries (2150mAh) : 4.8V (5W)


Standard tip
Shape-B (No.T11-B)


Battery life
Alkaline batteries : 60 minutesNickel hydrogen batteries (2150mAh) : 120 minutes


Total length
212mm


Weight
76g




[ Measurement conditions ]- When using new batteries, performance will vary depending on batteries.- The operating time was measured from when powered on until the temperature came down less than 300ºC which is supposed as minimum for soldering.* When using the batteries except specified above, performance and hour operation will vary.* Total length (w/o cap)* Weight (w/o battery)